Quick Answer: Construction cost per square foot in Denver generally falls within national ranges — residential roughly $150-$300/SF, commercial $200-$400/SF, industrial $150-$250/SF — with local factors (labor market, permits, climate, delivery) pushing Denver above or below the national midpoint. Costs vary significantly by neighborhood, project scope, and market conditions. The ranges below are general estimates based on publicly available data and industry benchmarks, not city specific bids. Contact local contractors for accurate pricing.
Key Takeaways
- Denver construction costs are driven by local labor, permits, climate, and delivery — not a single Denver price.
- Use national ranges as a starting point, then adjust for Denver specific factors.
- Residential, commercial, and industrial price out differently per SF.
- Always get local contractor quotes — ranges here are general, not bids.
General US construction cost per square foot
These are broad national ranges, useful as a starting point. Denver will land higher or lower depending on the factors below.
| Project type | General US range (per SF) |
|---|---|
| Residential new build | $150 - $300 |
| Custom / high end residential | $250 - $500+ |
| Commercial (office / retail) | $200 - $400 |
| Industrial (warehouse / light) | $150 - $250 |
| Renovation / tenant improvement | $50 - $200 |
Costs vary significantly by neighborhood, project scope, and market conditions. The ranges below are general estimates based on publicly available data and industry benchmarks, not city specific bids. Contact local contractors for accurate pricing.
What affects construction cost in Denver
In Denver, expect construction costs to land mid range nationally driven by a mix of union and open shop labor, a standard permit process, and standard material delivery. Local conditions — snow, altitude — affect schedule and detailing. Altitude and snow affect schedule; growing market can tighten labor availability.
Cost by project type
| Project type | Notes |
|---|---|
| New construction | Foundation to finish; highest cost per SF |
| Renovation | Demo + new work; varies with existing conditions |
| Tenant improvement (TI) | Interior buildout in existing shell |
| Addition | Ties to existing structure; mid cost |
How to estimate Denver construction costs
- Start with measured quantities. Take off every quantity off the drawings (AI takeoff reads PDFs in seconds; manual takeoff takes hours).
- Apply local material prices. Get real supplier quotes for Denver — not list prices.
- Apply your burdened labor rate. Use your actual rate for Denver's labor market.
- Add overhead. 10-20% general range — your real rate from your books.
- Add profit. 5-15% general range, set by market and risk.
- Sanity check per SF. Divide the bid price by SF and compare to the ranges above — if you are way off, find out why.
Sample cost calculation
For a 2,000 SF residential build at the national midpoint (~$225/SF), the general range total is ~$450,000. In Denver, adjust up or down based on the factors above — a high cost of living market with union labor moves toward the top of the range; a low cost open shop market moves toward the bottom. This is a sanity check, not a bid.
Costs vary significantly by neighborhood, project scope, and market conditions. The ranges below are general estimates based on publicly available data and industry benchmarks, not city specific bids. Contact local contractors for accurate pricing.