Key Takeaways
- Arlington construction costs run $141-$282/SF residential, $188-$376/SF commercial, and $141-$235/SF industrial.
- Local factors — not a single Arlington price — drive where a project lands in these ranges.
- Use the national ranges as a baseline, then adjust for Arlington's labor, permits, and site conditions.
- Always get local contractor quotes — these are planning ranges, not bids.
Construction cost per square foot in Arlington
Arlington (TX, population ~398,112) sits in the South region. Construction costs here reflect a regional multiplier of about 0.94x the national baseline, driven by local labor, permitting, climate, and delivery logistics.
| Project type | Arlington range (per SF) | General US range (per SF) |
|---|---|---|
| Residential new build | $141-$282 | $150-300 |
| Custom / high-end residential | $338-$508 | $250-500+ |
| Commercial | $188-$376 | $200-400 |
| Industrial / warehouse | $141-$235 | $150-250 |
| Renovation / TI | $132-$338 | $120-300 |
What drives Arlington construction costs
There is no single "Arlington price per square foot." Your project lands higher or lower in the range based on:
- DFW-metro pricing with competitive labor rates.
- Clay soils require foundation engineering.
- Entertainment and mixed-use development anchors commercial demand.
CyanBuild vs manual estimating for Arlington projects
Most Arlington contractors still estimate by hand-counting plans or paying an estimator $40-90/hr. CyanBuild reads the PDF and does the counting and measuring automatically — then prices it with your local Arlington rates.
| Approach | Time per project | Cost | Accuracy |
|---|---|---|---|
| Manual takeoff + spreadsheet | 25+ hours | Estimator salary or $40-90/hr | Human-error prone |
| CyanBuild AI takeoff | Minutes | A few dollars per page | Consistent, reviewable |
Frequently Asked Questions
What is the construction cost per square foot in Arlington?
In Arlington, expect roughly $141-$282/SF for residential, $188-$376/SF for commercial, and $141-$235/SF for industrial. These are planning ranges adjusted for Arlington's labor, permitting, and site conditions — get contractor quotes for a real bid.
Why are construction costs in Arlington about average than the national average?
DFW-metro pricing with competitive labor rates. Clay soils require foundation engineering. Entertainment and mixed-use development anchors commercial demand.
How do I estimate a Arlington project budget?
Start with the square-foot ranges above for your building type, multiply by your gross floor area, then adjust for Arlington-specific factors like dfw-metro pricing with competitive labor rates.. For a defensible number, run a takeoff from the plans and price it with local labor and material rates.
Does Arlington require special code or permitting that affects cost?
Yes — Arlington projects must meet TX and local codes. Clay soils require foundation engineering. Budget for plan review and inspections as a line item.
Can CyanBuild help estimate a Arlington project?
Yes. Upload your PDF plans and CyanBuild's AI detects and counts doors, windows, walls, and other elements, then prices them with your local Arlington rates. You review and adjust — no manual clicking.