The G703 is where the real billing happens — line by line, column by column, every month until the project is done.
The AIA G703 Continuation Sheet is the detailed backup to the G702 Application for Payment. It lists every line item from your Schedule of Values with columns tracking scheduled value, previous billings, current period work, stored materials, total completed, percentage, and balance. The G703 totals flow directly into the G702 — Line 4 (Total Completed & Stored to Date) comes from your G703 Column G total.
What this means for your next bid
The point of understanding aia g703 continuation sheet is not theory — it is what changes on your next bid. When you build up your estimate from real quantities, real material prices, and your real burdened labor rate, you stop guessing and start bidding numbers you can defend. The estimator who can show the math behind every line — the sheet it came from, the price applied, the waste added — wins the tie breakers and sleeps through the job because the numbers were honest from the start.
Where most contractors lose money is in the gap between the bid and the job. That gap is almost always the same things: a labor rate that was the wage and not the burden, a contingency that was folded into profit and then eaten by unknowns, or a quantity that was miscounted because no one verified the flagged items. Each of those is preventable with a build up method you run the same way every time. The method matters more than the tools — but the tools (AI takeoff, your spreadsheet for pricing) make the method fast enough to use on every bid.
For aia g703 continuation sheet specifically, the move that pays off is treating the takeoff as the foundation and the pricing as the judgment. Get the quantities fast and with confidence flags so you know what to verify; then spend your time on the numbers that actually move the bid — your material prices, your crew's real productivity, your overhead from your books, and your profit set by the risk of the client and the scope. That split is what lets a small team bid like a big one.
Putting it into practice
Here is how to run this on your next project. First, take off every quantity off the drawings — AI takeoff reads the PDFs in seconds and flags anything it is not sure about; if you are doing it by hand, count and measure every unit your trade bills on and write down the sheet each number came from. Second, price materials at your real supplier prices with a waste factor (5 to 15 percent by material), not list prices. Third, apply your burdened labor rate — wages plus taxes, insurance, benefits, and overhead — and a productivity range from your past jobs, not one number. Fourth, add your real overhead (10 to 20 percent general range, from your books) and a contingency line sized by the risk you see in the scope. Fifth, set profit by the market and the risk (5 to 15 percent general range), not a flat number on every bid. Sixth, divide the bid price by the project size and compare it to a benchmark from a past job — if you are way off, find out why before you submit, because a number that looks like a windfall is usually a missed quantity.
The common thread is that every number in your bid ties to something real: a quantity from a sheet, a price from a supplier, a rate from your books, a percentage from your overhead. Nothing is a guess, nothing is a rule of thumb you cannot defend. When a client asks why your number is what it is, you can show the math — and that is what wins the bid over a cheaper guess.
Finally, track what actually happened after the job. Compare your bid to your actual cost, by trade and by line, and feed what you learn back into your next estimate. The estimators who win long term are the ones who close the loop — bid, build, compare, adjust — because every job makes the next bid more accurate. That compounding is the real return, and it is available to any contractor who runs the method consistently, with or without AI tooling. The AI just lets you run it on more bids with the same team.